CHARACTERISTIC:
1.Due to the abrupt changes,the pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment,anti-dropping device must be equipped.
2. Don't use the air gripper under strong external force and impact force.
3.When install and fix the air gripper, avoid falling down, collision and damage. 4.When fixing the gripping jaw parts, don't twist the gripping jaw.
|
Bore size(mm) |
10 16 20 25 32 |
|
Acting type |
Double acting |
|
Fluid |
Air(to be filtered by 40μm filter element) |
|
Operating pressure |
10:0.2~0.7MPa(29~100psi)(2.0~7.0bar) |
|
Others:0.15~0.7MPa(22~100psi)(1.5~7.0bar) |
|
|
Temperature °C |
-20-70 |
|
Lubrication |
Cylinder:Not required; Gripperjaws: Lubricate grease |
|
Max. frequency |
60(c.p.m) |
|
Repeatability |
±0.2mm |
|
Cushion type |
Bumper |
|
Gripping force [Note1] |
0.16N.m 0.55N.m 1.10N.m 2.30N.m 5.00N.m |
|
Open or close angle |
Close:-2°~-5° Open:180°±2° |
|
Sensor switches [Notel] |
CMSH, DMSH, EMSH |
|
Port size |
M5x0.8 |
| product name : | HFZ32B AIRTAC Pneumatic finger cylinder |
| Product brand : | AIRTAC |
Praise