CHARACTERISTIC:
1.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
2.The medium used by cylinder should be filtered to 40pm or below.
3.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
4.If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
|
Bore size(mm) |
6 8 10 12 16 20 25 |
|
Acting type |
Double acting |
|
Fluid |
Air(to be filtered by 40pm filter element) |
|
Operating pressure |
0.2~0.7MPa(29~100psi)(2.0~7.0bar) 0.15~0.7MPa(22~100psi)(1.5~7.0bar) |
|
Proof pressure |
1.2MPa(175psi)(12.0bar) |
|
Temperature °C |
-20-70 |
|
Speed range mm/s |
50-500 |
|
Stroke tolerance |
Stroked 00+&° Stroke>100 +^5 |
|
Cushion type |
Bumper(Both ends)、Shock absorber |
|
Sensor switches [Notel] |
CMSH, DMSH, EMSH |
|
Port size |
M5x0.8 1/8" |
| product name : | HLS25*10-S AIRTAC Slide cylinder |
| Product brand : | AIRTAC |
Praise