Original AirTAC MD16X40S cylinder, free installation AirTAC MD16X40S cylinder

Specifications

Bore size(mm)			6	10	16	20	25	32
Acting type	MD/MDD/MDJ		Double acting
	MSD/MTD		Single acting
Fluid			Air(to be filtered by 40 µ m filter element)
Operating pressure		Double acting	0.15-1.0MPa(22-145psi)
		Single acting	0.2-1.0MPa(28-145psi)
Proof pressure			1.5MPa(215psi)
Temperature ℃			-20-70
Speed range mm/s			Double acting: 30-500 Single acting: 50-500
Stroke tolerance			+1.00
Cushion type			Bumper
Port size			M5 x0.8					1/8″

Stroke

Bore size (mm)		Standard stroke (mm)	Max. std stroke
6	Double acting	5 10 15 20 25 30 35	35
	Single acting	5 10 15 20	20
10	Double acting	5 10 15 20 25 30 35	35
	Single acting	5 10 15 20	20
16	Double acting	5 10 15 20 25 30 40 50	50
	Single acting	5 10 15 20	20
20	Double acting	5 10 15 20 25 30 40 50 60	60
	Single acting	5 10 15 20	20
25	Double acting	5 10 15 20 25 30 40 50 60	60
	Single acting	5 10 15 20	20
32	Double acting	5 10 15 20 25 30 40 50 60	60
	Single acting	5 10 15 20	20

Mounted from 6 directions

Internal structure and material of main parts

serial number	name	material	serial number	name	material
1	Hex nut	mild steel or stainless steel	9	Piston O-Ring	NBR
2	piston rod	Stainless steel or S45C hard chrome plated abrasive body	10	Wear pads	Wear-resistant material
3	Piston Rod O-Ring	NBR	11	piston	Aluminum alloy
4	ontology	Aluminum alloy	12	O-ring	NBR
5	crash pad	TPU	13	C-shaped buckle	spring steel
6	Magnet holder	Aluminum alloy	14	back cover	Aluminum alloy
7	Magnet spacer	NBR	15	crash pad	TPU
8	magnet	Burnt Structure Magnet

Dimensions

Features:

1. Original authentic AirTAC MD16X40S cylinder.
2. The AirTAC MD16X40S cylinder has a variety of fixing methods, which are easy to install and use.
3. AirTAC MD16X40S cylinder can assemble multiple cylinders together, effectively saving installation space.
4. AirTAC MD16X40S cylinder piston rod has high guiding precision without extra lubricant.
5. AirTAC MD16X40S cylinders are available in a variety of specifications.

6. AirTAC MD16X40S cylinder adopts high temperature resistant sealing material to ensure the normal operation of the cylinder at 150℃ (optional).

Install using:
1. When the load of the AirTAC MD16X40S cylinder changes during operation, a cylinder with a large output capacity should be used.
2. When the AirTAC MD16X40S cylinder is exposed to high temperature or corrosion, the relevant cylinder that is resistant to high temperature or corrosion should be selected.
3. AirTAC MD16X40S cylinder should take necessary protective measures in environments with high humidity, dust or water droplets, oil dust, and welding slag.
4. Before connecting the AirTAC MD16X40S cylinder to the pipeline, the dirt in the pipeline must be removed to prevent particles from entering the cylinder.
5. The medium used for AirTAC MD16X40S cylinder should be filtered to 40μm or below.
6. Antifreeze measures should be taken in the low temperature environment of AirTAC MD16X40S cylinder to prevent moisture from freezing.
7. AirTAC MD16X40S cylinder should be tested with no load before use. Before running, the buffer should be adjusted to the minimum and gradually loosened to avoid damage to the cylinder caused by excessive impact.
8. AirTAC MD16X40S cylinder should avoid the influence of side load during operation to maintain the normal operation of the cylinder and prolong the service life.

9. When the AirTAC MD16X40S cylinder is disassembled and stored for a long time, please conduct anti-rust treatment on the surface. Dust caps should be added to the air inlet and outlet.